• 3, 10, 30 and 50 kHz with models available from 25 kW to 1200 kW
• Rated for continuous or intermittent duty
• Variable ratio output isolation transformer for load impedance matching
• Internal load matching capacitors for full power operation over a wide range of load conditions
• Input power factor is 0.95 under all operating conditions
• Output regulation accuracy is ±1% of rated power with ±10% line variance to ensure precise process control
• Single control board. Field replaceable without adjustment for easy maintenance
• Remote control interface with 0-10 V. Optional 4-20 mA remote analog input
• Optional UNICOOL closed loop water cooling and recirculating system
• Optional RS-232/485 interface for computer monitoring and control

General Purpose Induction Heating Power Supply

The STATIPOWER® SP16 is designed to match multi-turn coils (400- 2000 V) that are used for hardening, tempering, tube heating, crystal growing, brazing, wire and strip heating and many other induction heating applications. A wide variety of heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer.

Unitized Design For Stand-Alone Operation

Simply connect three phase 460 V input power, cooling water and heating coil and you're ready to begin heating. The cabinets are designed to accommodate a variety of fixtures, conveyors and part handling machines. Complete stand-alone control and monitoring include: Manual start/stop push buttons, heat level control with 10 turn lockable dial, four meters and annunciator lights to monitor all operating parameters.

Remote or Computer Controlled Operation

Remote control can be accomplished by connection to the user interface provided. Heat level can be controlled by a remote potentiometer or 0-10 V analog signal from a PLC. Options include a 4-20 mA process control signal or RS-232/485 interface for remote computer monitoring, data logging and control.

Click For Induction Power Supply Equipment...