• 30 kHz with models available from 400 kW to 1.5 MW output
• Higher efficiency than older technology SCR models
• Rated for continuous duty
• Variable ratio output isolation transformer for load impedance matching
• Internal load matching capacitors for full power operation over a wide range of load conditions
• Output regulation accuracy is ±1% of rated power with ±10% line variance to ensure precise process control
• Control board is field replaceable without adjustment for easy maintenance
• Remote control interface with 0-10 V or optional 4-20 mA remote analog input
• Built by the world's largest designer and manufacturer of induction heating equipment

Power Supply For High Power Induction Heating

The STATIPOWER® SP14 is designed to match multi-turn coils (400- 2000 V) that are used for hardening, tempering, tube heating, forging, wire, strip and slab heating and many other induction heating applications. A wide variety of heating coils can be properly matched with built-in load tuning capacitors and multi-tap output isolation transformer.

Unitized Design For Stand-Alone Operation

Just connect three phase 460 V input power, cooling water and heating coil and you're ready to begin heating. Complete stand-alone control and monitoring include: Heat level control with 10 turn lockable dial, four meters and annunciator lights to monitor all operating parameters.

Remote Or Computer Controlled Operation

Remote control can be accomplished by connection to the user interface provided. Heat time can be controlled from a foot switch, machine control relay or by the process line PLC. Heat level can be controlled by a remote potentiometer, or optional 4-20 mA process control signal or with an analog 0-10 V signal from a PLC.

Click For Induction Power Supply Equipment...