800.624.6297 • ph: 248.585.9393 • fax: 248.589.1062 • sales@inductoheat.com

IROSS® Line Frequency Systems

Home » Products » Induction Low Frequency Heating » The IROSS® Line Frequency System

Patented Technology for Pipe-End Heating

FluxManager® Units are designed specifically for heating a variety of tubular products. These systems utilize patented technology that yields superior temperature uniformity compared to conventional medium frequency designs.

  • Preheat for welding • Preheat for swaging
  • Hardening • Anenealing • Normalizing
  • Removal and cure of coatings
  • Friction weld and swage stress relieving

Features / Benefits

  • Deep, uniform temperature distribution, ID/OD, laterally, and longitudinally along extended lengths of pipe ends.
  • Uses Flux concentration for increased efficiency.
  • Achieves uniformity requirement ?T = +/- 77°F (25°C), even when tubes are positioned non-concentric
Thermal Imagery
7 5/8" (194mm) dia. 3/4" (19mm) wall.
Heated length: 12" (30mm) - 93 sec.

Specifications

Universal Power: 50 or 60Hz / 350 - 600VAC input.
Flexible:
4 coil diameters cover
all OCTG pipe sizes		 # 762: 2.375" - 7.625" (61 - 193 mm)
# 1062: 7.625" - 10.625" (193 - 269 mm)
# 1462: 10.625" - 14.625" (269 - 371 mm)
# 2062: 14.625" - 20.625" (371 - 473 mm)
Modular:
Transformer / Control
Sizes (W x L x H)		 82" x 52" x 72"
2080mm x 1320mm x 1830mm

Click the following link to view the IROSS™ Line Frequency Systems for Pipe End Heating on Youtube. http://www.youtube.com/user/InductoheatInc#p/a/u/1/RTj9VzsJoto